DealsNews
Home / News / Coupon Guides

LucidDirect AUDIT Fixed-to-Scaled Daily Loss Limit Guide

Understand LucidDirect fixed daily loss limits, the LucidScale 60% formula and 30% AUDIT savings through verified rules and labeled examples.

LucidDirect starts most account sizes with a fixed daily loss limit, then replaces it with LucidScale after the account closes above its Initial Trail Balance. LucidScale equals 60% of the highest end-of-day account profit. The current onsite offer lists 30% off LucidDirect with code AUDIT; because a current official base price was not verifiable, all purchase-price numbers here are hypothetical examples.

Direct answer table

QuestionAnswer
Which market?Futures
Which plan?LucidDirect
Current onsite codeAUDIT
Current onsite discount30% off LucidDirect
What triggers a fixed DLL restriction?Reaching the listed daily loss limit
Is the DLL a hard account breach?No; it is a soft restriction if the maximum loss limit has not been reached
When does LucidScale replace the fixed DLL?After the account closes above the Initial Trail Balance
LucidScale formulaHighest end-of-day account profit × 60%

DLL means daily loss limit. MLL means maximum loss limit. They are separate controls: reaching the DLL restricts new trades until the next session, while the MLL governs account survival.

AUDIT pricing math for LucidDirect

Use the displayed checkout subtotal, not a number copied from an old promotion.

Hypothetical 30% discount examples

FirmAccount or planHypothetical original priceOnsite discountCouponExact example savingHypothetical final price
Lucid TradingLucidDirect$100.0030%AUDIT$30.00$70.00
Lucid TradingLucidDirect$250.0030%AUDIT$75.00$175.00
Lucid TradingLucidDirect$400.0030%AUDIT$120.00$280.00
Lucid TradingLucidDirect$500.0030%AUDIT$150.00$350.00

Every price in this table is hypothetical. Actual cost depends on the selected account and the current checkout.

Fixed daily loss limits and transition points

The official LucidDirect daily-loss policy lists the following values.

Account sizeStarting fixed DLLInitial Trail BalanceTransition rule
$25,000NoneNoneNo listed fixed-to-scale transition
$50,000$1,200$52,100Close above $52,100
$100,000$2,100$103,600Close above $103,600
$150,000$3,000$155,100Close above $155,100

A temporary intraday move above a threshold is not the stated trigger. The policy describes a close above the Initial Trail Balance.

The three daily-loss states

StateConditionDLL methodOperational result
Starting stateAccount has not closed above the transition balanceFixed amount for the listed sizesReaching it restricts trading until the next session
Transition closeEnd-of-day balance closes above Initial Trail BalanceFixed DLL is replacedLucidScale begins
Scaled stateNew highest end-of-day profit is recorded60% of highest EOD profitDLL can rise and does not later fall

This progression matters because the risk number can change after account growth. A static spreadsheet should therefore include both the current state and the highest end-of-day profit.

LucidScale formula with worked examples

LucidScale DLL = highest end-of-day account profit × 0.60

Highest end-of-day profit60% calculationLucidScale DLLIf profit later falls
$2,500$2,500 × 0.60$1,500Remains $1,500
$4,000$4,000 × 0.60$2,400Remains $2,400
$6,000$6,000 × 0.60$3,600Remains $3,600
$10,000$10,000 × 0.60$6,000Remains $6,000

These are rule-calculation examples, not promised trading outcomes. The official help center says the scaled DLL increases as the account grows and does not decrease after a drawdown.

Build a transition tracker

Step 1: Record the opening parameters

Write down the account size, fixed DLL, maximum loss limit, current balance, and Initial Trail Balance. Do not substitute the DLL for the MLL.

Step 2: Update after each session close

Record the closing balance and calculate account profit from the starting balance. Only use closed end-of-day values for the transition and scaling tracker.

FieldEntryFormula or source
Account sizeEnter sizeAccount dashboard
Session closing balanceEnter valueAccount dashboard
Starting balanceEnter valuePlan
EOD account profitClosing balance − starting balanceCalculation
Highest EOD profitMaximum recorded EOD profitTracker
Current DLL methodFixed or LucidScaleOfficial rule state
LucidScale amountHighest EOD profit × 0.60Calculation

Step 3: Mark the transition once

When the account first closes above its Initial Trail Balance, change the state from Fixed to LucidScale. Do not switch back merely because a later closing balance is lower.

Step 4: Use an internal stop below the rule limit

A trader may choose a smaller personal session-loss stop to leave room for commissions, slippage, or execution errors. This is a planning control, not a Lucid Trading rule.

Example current DLLIllustrative personal bufferIllustrative internal stopStatus
$1,200$200$1,000Hypothetical planning example
$2,100$350$1,750Hypothetical planning example
$2,400$400$2,000Hypothetical planning example
$3,600$600$3,000Hypothetical planning example

Apply AUDIT without mixing price and risk rules

  1. Select the LucidDirect futures account.
  2. Check the displayed subtotal and account size.
  3. Enter AUDIT.
  4. Confirm the subtotal falls by 30%.
  5. Verify the final price using subtotal × 0.70.
  6. Read the current DLL and MLL rules for the selected size.
  7. Pay only after both the discount and plan selection are clear.
Review itemCoupon effectRule effect
Purchase subtotalReduced by 30% under the onsite listingNone
Fixed DLLNoneSize-specific starting restriction
Initial Trail BalanceNoneDetermines transition
LucidScale DLLNone60% of highest EOD profit
MLLNoneSeparate account-loss boundary

Common calculation errors

  • Using intraday high profit instead of the highest end-of-day profit.
  • Assuming LucidScale falls after a losing day.
  • Treating a soft DLL restriction as identical to an MLL breach.
  • Applying the 40% daily-payout headline to LucidDirect; the onsite listing assigns LucidDirect a 30% reduction.
  • Presenting a hypothetical subtotal as a current plan price.

Recheck the official LucidDirect daily loss limit page and the live checkout before purchase because rules and prices may change.

Official rule sources

Frequently Asked Questions

What discount does AUDIT provide on LucidDirect?+

The current Futures Prop Firm Offers listing states 30% off LucidDirect with AUDIT. Confirm the final reduction at checkout.

Is the LucidDirect daily loss limit a hard breach?+

The official policy describes it as a soft restriction. Reaching it blocks additional trading until the next session if the maximum loss limit has not been reached.

When does LucidScale begin?+

It replaces the fixed daily loss limit after the account closes above the Initial Trail Balance listed for its size.

How is the LucidScale daily loss limit calculated?+

Multiply the highest end-of-day account profit by 60%. The resulting amount can rise with a new high and does not later decrease.

Does the $25,000 LucidDirect account have a fixed DLL?+

The current official table lists no fixed DLL and no Initial Trail Balance for the $25,000 size.

Are the coupon price examples current LucidDirect prices?+

No. They are hypothetical arithmetic examples. Use the actual subtotal displayed at checkout.

◆ Verified DealsView all deals →
Lucid Trading
Lucid Trading
futures
Up to 40% Off
AUDIT→